BB code is On. To do this run the following command in a terminal window: Since most drivers are already included with the live image you will most likely not need to install anything to find out. Note that the devices below do not make a complete list of fully supported usb devices by any way. Obviously this would be ideal. Registration is quick, simple and absolutely free.

Uploader: Vudobar
Date Added: 7 October 2009
File Size: 46.23 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 10449
Price: Free* [*Free Regsitration Required]

The time now is I found the card in the input device drop-down in the setup and managed to route the mic to the output to see if it works, and it does!!!

When I use alsamixer and press F6 to change ljnux sound card and select io2, an error message shows: Ce peripherique n’a pas de commandes This peripheral has no command googling away Best Regards, Justin Baro. No such file or directory ALSA lib pcm. Here is the relevant output, perhaps it will help.


Everything Mixbus does here is just to set the most important settings for the audio interface and qjackctl provides even more settings than Mixbus so therefore it is better to start qjackctl first to handle Jack, and then Mixbus. Specs available at http: But it is only the direct sound of the guitar.


To see a list of supported devices see http: Ensure you have an acceptable firewire chipset 2. What my aim is as far as music is concerned: The device still works though, the jackd crash occurs later, with this msg:. Other Resources and Links.

I am new to firewire in Linux. Else, try increasing your frame size for instance.

[ubuntu] ubuntu studio and alesis IO2

I tried a lot with the preferences etc but… regards erik stunkat. If you’d like to contribute content, let us know. If you like the linux audio world lnux are curious enough, you will probably want to experiment with the lot of choices there are, in the future.

This is due to most devices not following the 2. Note that the devices below do not make a complete list of fully supported usb devices by any way.

[SOLVED] Alesis io2 Express + JACK – n00b needs help.

Comments Same response Permalink Submitted by tom. Thanks for the answers and tips, they gave me clues to get more tips and tricks here and there. Your post is very interesting. Open failed with -1 Failed to start alexis. Find More Posts by afuerst. August 20th, 3. If you have such a device and are willing to help us with ii details, please contact the development mailing list. I have Firewire with Texas chip. If you cannot get your latency low enough you could try a distro such as Debian that has a real time kernel Linux-RT.


ACK server starting in non-realtime mode control device hw: Do you have to be a Linux expert? Starting the Audio application in my case Mixbus 3.

It does’nt seem to be the case.